Hi, Can anyone tell me how to stretch a Glogster page to fit into a Wikispaces page. This is the code for my Glogster page:

I tried adjusting the height and width, but it still stays the same size. I imagine it has to do with "AllowFullScreen" but I don't know enough HTML to change that.

Thanx so much!!
Faith

Views: 641

Reply to This

Replies to This Discussion

Hi Faith,

I changed the values for height and width at the end of a sample snippet and it worked for me (couldn't use yours because these comments read the HTML). You need to make sure that they are the same ratio as the initial measurements.
eg height="812" width="600"
or height="1082" width="800" this looked best on my laptop but on lower resolution screens the 600px width is probably better.

Here is the 800 wide version:

I hope that is a help.

PS It doesn't come up 800 wide here in NIng. Weird, it is definitely the full 800 wide in Wikispaces
It is funny because I JUST experienced the same problem. As Jason mentioned, you can change the dimensions but I couldn't get it to work for some reason. I scrolled through the options of embed codes and it gave me the option for a blog code that was too small. After finally clicking out and going back to the main page of my glog, at the bottom I saw an option to "embed to web page." I copied that code and the Glog covers my entire wiki page. Hope it works out for you!
Strange that that embed is different! It gives the Glog a width of 960px, nice find!
With so many people using classroom wikis, you'd think there would be a special embed code for it. Maybe that is something Glogster can add in the near future:)
Hi Kim - did you try using the embed code that is in the "Share" button at the bottom of the glog? Use that code, change the height and width and should make it work. Let me know if any issues. We have literally thousands of glogs on wikispaces, so let's make it work. Thanks! Andrew
Thanks for the helpful tip. Do you think that it will work for pbwiki as well?
Hi,
Thank you all for you advice. I went back to my original Glog page and I don't see "embed to web page" anywhere. Are you in regular Glogster or Glogster.edu (that's where I am.)
Thanx again,
Faith
go to the bottom of your account profile, find my glogs, and copy the embed code


when i embed glogs in wordpress, not only do i have to change the pixel values according to ratio, there's also a scale % number you have to edit according to ratio as well... see example below... changed 960w down to 555, but also scale from 100 to 57...

e.g. iframe src="http://www.glogster.com/glog.php?glog_id=1823913&scale=57" width="555" height="752" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" style="overflow: hidden;">
Thank you so much. i think that was the solution that I was looking for. I'll try it out when i can work on it later today and I'll let you know!! THank you!
Faith
Hi Faith,

Instead of specifying the width in pixels, i.e. width="752" , I think you can just specify it as: width="100%" and that will cause the embedded window to match the wikispaces page width.

Jay
That didn't work when I tried it. I might have messed something up though...
Nice catch, Jason.

I played around with the embed codes from Glogster, and I think I found a useful version. This is identical to Jeremy's suggestion, so the link just adds a worked wikispace example.

- Jay

RSS

Report

Win at School

Commercial Policy

If you are representing a commercial entity, please see the specific guidelines on your participation.

Badge

Loading…

Follow

Awards:

© 2020   Created by Steve Hargadon.   Powered by

Badges  |  Report an Issue  |  Terms of Service